Last Update:
You can trust our selection for Epoxy Glue For Plastic Reviews. Because We have worked hard studying and analyzing 56304 reviews for Epoxy Glue For Plastic and rating them. It was a difficult job to list only ten products for Epoxy Glue For Plastic where thousands of them available online. I hope it will help you to take final decision for Best Epoxy Glue For Plastic.
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
Comparison Chart for Best Epoxy Glue For Plastic
We found 56304 reviews when researching. We have considered users feedback on the Epoxy Glue For Plastic and our suggestions includes only the finest of them in this article.
| No | Product | Score | Action |
|---|---|---|---|
| 1 | Gorilla 2 Part Epoxy | 9.6 | Buy On Amazon |
| 2 | J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz | 9.6 | Buy On Amazon |
| 3 | Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868) | 9.4 | Buy On Amazon |
| 4 | J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml | 9.2 | Buy On Amazon |
| 5 | J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Black - 25 ml | 8.8 | Buy On Amazon |
| 6 | Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive Heavy Duty Glue for Plastic Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery | 8.6 | Buy On Amazon |
| 7 | J-B Weld Pro Size ClearWeld 5 Minute Set Epoxy | 8.6 | Buy On Amazon |
| 8 | J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Translucent Yellow - 25 ml | 8.4 | Buy On Amazon |
| 9 | J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz | 8.4 | Buy On Amazon |
| 10 | Araldite ARA-400005 Translucent Rapid Adhesive Epoxy-Sets in 5mins | 8.2 | Buy On Amazon |
1. Gorilla 2 Part Epoxy
- Strong, permanent, fast and gap-filling; great for multiple surface applications
- Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
- Dries clear; ideal for clean, easy finishing
- 6 minute set; plenty of repositioning time for the perfect fit
- Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.
2. J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty – 2 oz
- J-B WELD PLASTICWELD: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild various plastic compounds and surfaces.
- CURE AND SET TIME: After kneading the two part formula together by hand, PlasticWeld takes 25 minutes to set and cures in 3 hours.
- PRODUCT FEATURES AND STRENGTH: J-B Weld PlasticWeld has lap shear strength of 600 PSI.
- APPLICATIONS: ABS, PVC & CPVC pipes and plastics, auto bumpers and trim, vinyl surfaces and siding, marine repairs & fiberglass parts, plastic water tanks, and plumbing.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
- Repair and rebuild any rigid and semi-flexible plastic including ABS, PVC and CPVC
- Bonds instantly
- Superior strength
- Will not shrink or pull away
- Rebuild automotive trim, fiberglass parts and vinyl siding
3. Loctite Epoxy Five Minute Instant Mix 0.47-Fluid Ounce Syringe (1365868)
- Easy-to-use self-mixing dispenser and precision applicator
- High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
- Waterproof, sand able and paintable
- It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
- Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
- The static mix nozzle delivers a uniform mixture of resin and hardener every time.
- It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
- Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.
4. J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe – Tan – 25 ml
- J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces.
- CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure.
- STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
- SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
5. J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe – Black – 25 ml
- J-B WELD PLASTICBONDER (Black): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
- CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure J-B Weld PlasticBonder set and cure color is black.
- STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI
- SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
6. Strongest Glue by HG POWER GLUE Industrial cyanoacrylate ca Adhesive Heavy Duty Glue for Plastic Repair Car Boat Model Airplane DIY Plastics PVC Rubber Ceramic Woodworking Steel Metal Pottery
- CONVENIENT STORAGE – 1 adhesive system, 4 application options: can be stored in refrigerator/freezer for 1-2 years or longer; use for bonding, strengthening, modelling, filling.
- HG POWER GLUE BONDS NEARLY MATERIALS – plastic, wood, rubber, glass, metal, aluminum, ceramics, stone etc.
- IDEAL GLUE FOR A HOST OF APPLICATIONS – a crack in the bumper or motorcycle fairing, a broken headlight bracket, torn RV paneling or simply an instant fix for your child’s favorite toy.
- SAVE TIME AND MONEY – Nearly all household items can be salvaged quickly at an affordable price.
- SUPERIOR BOND STRENGTH – Welding Glue from the bottle is unparalleled in its performance and, due to its unique combination of powder and glue, achieves significantly better bonds than standard glues.
7. J-B Weld Pro Size ClearWeld 5 Minute Set Epoxy
- J-B WELD CLEARWELD PRO SIZE: Same formula as the J-B Weld ClearWeld, just in two 4oz tubes! ClearWeld is a clear, quick setting and multipurpose two part epoxy that provides a strong and lasting bond on surfaces including metal, tile, most plastics, ceramic, glass, wood and more!.
- CURE AND SET TIME: After mixing at a ratio of 1:1, it takes 5 minutes to set and 1 hour to cure.
- STRENGTH: J-B Weld ClearWeld has tensile strength of 3900 PSI.
- SURFACE APPLICATIONS: Glass, ceramic, tile, plastics, concrete, wood, metal and more.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
- Fit Type: Universal Fit
8. J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe – Translucent Yellow – 25 ml
- J-B WELD PLASTICWELD: A quick setting and multipurpose two part epoxy that provides a strong and lasting bond on various plastic surfaces (Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl).
- CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticWeld takes 5 minutes to set and 1 hour to cure.
- STRENGTH: J-B Weld PlasticWeld has tensile strength of 3900 PSI.
- SURFACE APPLICATIONS: Plastic & PVC, Fiberglass, Glass, ABS, Composites and Vinyl.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
9. J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack – 10 oz
- J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding.
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure.
- VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius.
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass.
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
10. Araldite ARA-400005 Translucent Rapid Adhesive Epoxy-Sets in 5mins
- PROFESSIONAL GRADE STRENGTH: Strong, long-lasting water-resistant adhesive; solvent-free 2 part epoxy resin.
- FILL IN AND REPAIR: Cracks or scratches in snowboard skis or outdoor equipment, bond broken shoe soles and more.
- VERSATILE CLEAR GLUE: Use in automotive applications, repair ceramic and stone vases, statues, fix photo frames, use as ceramic glue or glue for plastic indoors or out.
- SETS IN 5 MINUTES: Easy quick set 5 minute epoxy glue dries and obtains full strength in 3 hours
- MULTI-USE APPLICATION: Effectively bonds to metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene and PTFE).
- STRONG AND DURABLE: Provides a strong bond for jobs that need to be done quickly; can be sanded and painted; water, oil, chemical and impact resistant; high temperature resistance (-30 to 80° Celsius); easy to use two part epoxy resin glue.
How To Choose The Best Epoxy Glue For PlasticDoes the thought of finding a great Epoxy Glue For Plastic stress you out? Has your mind been juggling between choices when it comes to buying Epoxy Glue For Plastic in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Epoxy Glue For Plastic for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Epoxy Glue For Plastic. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Epoxy Glue For Plastic in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Epoxy Glue For Plastic currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Epoxy Glue For Plastic based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Epoxy Glue For Plastic before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Epoxy Glue For Plastic they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Epoxy Glue For Plastic, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Epoxy Glue For Plastic before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Epoxy Glue For Plastic will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Epoxy Glue For Plastic if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Epoxy Glue For Plastic on the market, the products that got mostly negative ratings get filtered and discarded.